![background image](http://html.mh-extra.com/html/datacard/datacard-sp35/datacard-sp35_installation-manual_511355133.webp)
14
SP Series Production e-Guide
7
Click OK on the message box to begin running the laminator cleaning card.
8
When the process is complete, the printer ejects the laminator cleaning card in the output hopper.
9
Pull out the laminator cartridge and inspect for particles. If particles are present:
— Retrieve the laminator cleaning card from the output hopper and use it to remove the particles of topcoat
from the cartridge, as shown.
— If particles still remain on the cartridge and inside of printer, use a vacuum cleaner with a small plastic hose
attachment to carefully remove the particles. Also clean any remaining particles from the output hopper,
reject bin, and back door of the printer.
Tips for Success
•
If the cleaning card is not pushed into the printer far enough, you might see the message, "The card is stuck in
the L2 Laminator. OP 01612" on the PC. Push the card in farther, then click the Clean Laminator button again.
•
If the printer does not take any action after you click OK on the prompt and push the cleaning card in, the card
is not in the correct location. The cleaning card must be pushed under the white stripe inside the output hopper.
Look closely at the inside of the output hopper and the illustration in step 5.
•
At the end of the laminator cleaning cycle, the card might stick to the rollers in the output hopper. Pull on the
card to remove it.
•
Discard the laminator cleaning card after one use.
•
Avoid contact with the heated roller, which contains sensitive electronic components.
•
If cleaning the laminator does not solve the problem, contact your service provider for assistance.
Summary of Contents for Datacard SP35
