DataCard Datacard SP35 Installation Manual Download Page 156

Page: 156 / 199

SP Series Info Central: Troubleshooting

The card is printed upside
down (the image is rotated
180 degrees).

The card creation application has
rotated the card.

The driver card rotation setting
might be incorrect.

See the information for the card
creation application.

Set the card rotation

using the

Properties (98 and Me) or
Printing Preferences (2000 or
XP) dialog box.

The printed image on one or
a few cards has high
contrast.

The card had topcoat printed on
it and then an image was printed.

The cards might not meet
specifications.

Do not re-use cards ejected from
the printer.

Obtain and use a different supply
of cards

Monochrome printing

Black-and-white images are
poorly dithered.

The image capture system needs
adjustment.

Brightness, contrast, or
sharpness might not be set for
the card design.

The card stock might not meet
specifications.

See the information for the image
capture system.

Change settings on the Color
Settings tab in the Printer
Toolbox

If this does not fix the problem,

change the intensity setting

Obtain and use a different supply
of cards

What you see

Possible causes

Solutions

Summary of Contents for Datacard SP35








































































































































































































Search results

Summary of Contents for Datacard SP35

Reviews:

Related manuals for Datacard SP35

Brands by name

Popular brands

DataCard Datacard SP35, Installation Manual

Search results

Summary of Contents for Datacard SP35

Reviews:

Related manuals for Datacard SP35

Brands by name

Popular brands