DataCard Datacard SP35, Installation Manual

Page: 112 / 199

42
SP Series Info Central: Setup
• Check the Windows Device Manager to verify that the device is installed:
— A contact smart card reader will appear as an entry under “Smart Card Reader.”
— If the contact reader appears as an entry under “Other devices” the device is not installed correctly. For
Windows Me and 98 SE, restart Windows to enable device installation.
— A contactless smart card reader is likely to appear as a Keyboard or a Human Interface Device.
— A 680 contactless reader does not appear in the Device Manager list.
• To verify the installation of SCM smart card driver files, use the SCM diagnostics utility.
— open the utility and look in the Connected Readers folder to see the devices. When the drivers and reader
are installing correctly, inserting the appropriate smart card will cause the “card status” to change to
“inserted.”
• To verify the installation of Gemplus smart card driver files, use the Gemplus SmartDiag utility, which is
available from the GemPlus web site.
• Printer Diagnostics, which you can install using the driver CD-ROM, include the ability to test some types of
smart card readers.
• To verify the installation of HID, Casi, iCLASS or Indala readers, install and use the configuration utility from the
RF IDeas Web site.
Tips for success
• Cards-per-hour ratings do not apply. The smart card personalization process requires dwell time that is
controlled by the personalizing application, not the printer and driver.
• The Retry button on message boxes is not available. The personalizing application can control messages, and
so some printer messages might not be displayed.