DataCard CP60 Printer Manual Download

Page: 76 / 134

Page 71

SY-01305 Data Error

The setting sent to the printer does not match printer
features.

Possible Cause 1:

A setting was sent to the printer for a module that is not

installed or enabled.

Solution 1:

Check the printer to see whether options are installed. If the

option is not present in the printer, do not send data for the option.

Possible Cause 2:

The printer data format is CP Driver and the printer was

moved from one PC to another PC.

Solution 2:

Open the Properties (98 or Me), Printing Preferences (2000 and

XP), or Document Default Properties (NT) dialog box and make sure that
settings match the printer that is currently connected. Click OK to make all
settings take effect.

Related Topics:

"Features and options" on page 3

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands