DataCard CP60 Printer Manual Download

Page: 9 / 134

Page 4

•

Printers with “U”

printing

can print one color

(monochrome) only. “C” printing is full-color or
monochrome (with specific ribbons).

•

All CP60 printers have a USB data

connection

. They

also have one of the following:

— Built-in Ethernet (Net) connection

— Open Card (OC) data format and Built-in Ethernet

•

Printers can include a

duplex

(2) module.

•

magnetic stripe

module can be a three-track (IAT)

module.

•

Printers can have a 100-card (H1) or 200-card (H2)

input hopper

. The input hopper can have a

lock

(K1).

•

An optional

smart card

module can have:

— Combination smart card reader (SC347) with

contact and contactless reader. Visible inside the printer;
includes a USB port on the printer.

— Contactless iCLASS® (SC205) or HID® (SC202) reader;

includes a USB port.

— Contact station (SC400): Visible inside the printer; includes

a serial port.

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands