DataCard CP60 Printer Manual Download

Page: 73 / 134

Page 68

DM-00765 No Duplex

The duplex module is not installed or detected.

Possible Cause 1:

The driver was set to use automatic duplex and a duplex

module is not installed in the printer.

Solution 1:

Send a one-sided card to the printer or set the driver for manual

duplex.

Possible Cause 2:

The connection between the duplex module and the rest

of the printer is damaged.

Solution 2:

Check the printer to see whether a duplex module is included in

the printer. If it is, power the print off and on; the printer might detect the
module when the printer powers up.

If a duplex module is part of the printer and you receive this message,

contact your service provider for assistance.

Related Topics:

"Features and options" on page 3

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands