DataCard CP60 Printer Manual Download

Page: 94 / 134

Page 89

MS-01424 Mag Stripe Error

Unable to read any data from the card.

Possible Cause 1:

The cards in the input hopper do not have a magnetic

stripe.

Solution 1:

Load magnetic stripe cards in the input hopper.

Possible Cause 2:

The magnetic stripe cards in the input hopper are not

oriented correctly.

Solution 2:

Load magnetic stripe cards correctly in the input hopper.

Possible Cause 3:

The magnetic stripe on the card is High Coercivity

material and the printer is set to Low Coercivity.

Solution 3:

To use the cards you have, set the printer to use High Coercivity

(using Printer Diagnostics). To encode with Low Coercivity, obtain Low
Coercivity cards.

Make sure the cards work with your magnetic stripe reader.

Tips for success:

•

If the magnetic stripe card does not have stripe material to match the
tracks sent, this message can appear. For example, this message
appears if you use a two-track card and send three tracks of magnetic
stripe data.

Magnetic stripe

Smart Card chip

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands