DataCard CP60 Printer Manual Download

Page: 56 / 134

Page 51

View the Network Address Mode, IP Addresses, and MAC Address

With “Status Menu” displayed on line 1, press the Up or Down Arrow key to display
“Network” on line 2.

Press the Enter key. “Address Mode” appears on line 2. Press the Enter key to
view the address mode. The possible values are DHCP or Static IP.

Press the Enter key to return to the Status menu. “Data Format” is displayed on line
2.

Press the Up or Down Arrow key to display “IP Address” on line 2.

Press the Enter key to display the IP address. If the address mode is DHCP and the
printer is not connected to an active DHCP network, the IP address is blank.

Press the Enter key to return to the Status menu. “Subnet Mask” is displayed on
line 2.

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands