DataCard CP60 Printer Manual Download

Page: 67 / 134

Page 62

The printer does not respond when
printing a card or when clicking
“Resume” on the Printer Toolbox.

•

Make sure the printer is plugged in. See

"Power on the printer" on

page 9

•

Make sure the printer is connected to the computer.

"Connect the

printer to the network" on page 27

•

If the Status Light on the printer is blinking amber (yellow), press
the Ready .

•

Power off the printer and power it on to see if communication
resumes.

•

See

Info Central

for more detailed communication

troubleshooting information.

The printer cover will not close.

•

Make sure no extra items are inside the printer.

•

Make sure the print ribbon cartridge is installed correctly. See

"Loading print ribbon" on page 7

•

If you installed or bumped the printhead cartridge, make sure it is
installed correctly. See Production in

Info Central

•

Push down firmly on the front edge of the cover to latch it.

What is the problem?

Try this:

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands