DataCard CP60 Printer Manual Download

Page: 107 / 134

Page 102

PR-01715, PR-01716 Cover Open

The cover was opened during printing.

Possible Cause:

The top cover was not closed securely or was opened

during printing.

Solution:

Push down firmly on the front edge of the top cover until it clicks

closed.

If the cover does not close...

•

Open the printer and make sure the print ribbon cartridge is installed
correctly.

•

Check for any items inside the printer, such as a cleaning roller that is
out of place. Fix any problems that you see.

•

Make sure that no cards are stuck in the printer. Remove any cards from
inside the printer.

•

Make sure the printhead cartridge is installed correctly. The top cover will
not close if the printhead cartridge is not installed correctly.

•

Make sure that nothing outside the printer prevents the cover from
closing.

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands