DataCard CP60 Printer Manual Download

Page: 109 / 134

Page 104

PR-01719 Printhead Error

The printhead is not installed or detected.

Possible Cause:

The printhead cartridge is not installed or the cables are

not attached to the printhead cartridge correctly.

Solution:

Power off the printer. Attach the printhead cable to the printhead

cartridge. Make sure the plug is pushed all the way into the receptacle.

Replace the printhead cartridge in the cover arm, close the printer, and
power on the printer.

•

If the printer cover does not close, make sure the printhead cartridge is
installed correctly. The cover will not close if the printhead cartridge is not
installed correctly.

See

Info Central

for steps to attach the printhead cable and to replace the

printhead.

If you cannot fix the problem,

contact your service provider for assistance.

Summary of Contents for CP60







































































































































Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands

DataCard CP60, Printer Manual

Search results

Summary of Contents for CP60

Reviews:

Related manuals for CP60

Brands by name

Popular brands