NOTE!
An active HAND-OFF-AUTO signal via the digital inputs has higher priority than the control keys [Hand on] [Auto on].
[Reset]
is used for resetting the adjustable frequency drive after an alarm (trip). The key can be
Enabled
[1] or
Disabled
[0] via par. 0-43
[Reset] Key on LCP
.
7.1.4 Changing Data
1.
Press the [Quick Menu] or [Main Menu] key.
2.
Use the [
▲
] and [
▼
] keys to find the parameter group to edit.
3.
Press the [OK] key.
4.
Use the [
▲
] and [
▼
] keys to find the parameter to edit.
5.
Press the [OK] key.
6.
Use the [
▲
] and [
▼
] keys to select the correct parameter setting. Or, to move to digits within a number, use the keys. The cursor indicates the
digit selected to be changed. The [
▲
] key increases the value, the [
▼
] key decreases the value.
7.
Press the [Cancel] key to disregard the change, or press the [OK] key to accept the change and enter the new setting.
7.1.5 Changing a Text Value
If the selected parameter is a text value, it can be changed by using the
up/down navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value to be saved and press [OK].
Figure 7.6: Display example.
7.1.6 Changing a Group of Numeric Data Values
If the chosen parameter represents a numeric data value, change the
chosen data value using the <> navigation keys as well as the up/down
navigation keys. Use the <> navigation keys to move the cursor hori-
zontally.
Figure 7.7: Display example.
7 How to operate the adjustable frequency
drive
VLT
®
AQUA Drive
Instruction Manual
7-8
MG.20.M5.22 - VLT
®
is a registered Danfoss trademark
7