7 How to operate the adjustable frequency drive
7.1 Ways of Operation
7.1.1 Ways of Operation
The adjustable frequency drive can be operated in 3 ways:
1.
Graphical Local Control Panel (GLCP), see 6.1.2
2.
Numeric Local Control Panel (NLCP), see 6.1.3
3.
RS-485 serial communication or USB, both for PC connection, see 6.1.4
If the adjustable frequency drive is equipped with the serial communication option, please refer to the relevant documentation.
7.1.2 How to operate the Graphical LCP (GLCP)
The following instructions are valid for the GLCP (LCP 102).
The GLCP is divided into four functional groups:
1.
Graphical display with status lines.
2.
Menu keys and LEDs - for selecting mode, changing parameters and switching between display functions.
3.
Navigation keys and indicator lights (LEDs).
4.
Operation keys and LEDs.
Graphical display:
The LCD display is backlit with a total of 6 alpha-numeric lines. All data is displayed on the LCP, which can show up to five operating variables while in
[Status] mode.
Display lines:
a.
Status line:
Status messages displaying icons and graphics.
b.
Line 1-2:
Operator data lines displaying data and variables de-
fined or chosen by the user. By pressing the [Status] key, up to
one extra line can be added.
c.
Status line:
Status messages displaying text.
The display is divided into three sections:
Top section (a)
shows the status when in status mode, or up to two variables when not
in status mode and in the case of an alarm/warning.
VLT
®
AQUA Drive
Instruction Manual
7 How to operate the adjustable frequency
drive
MG.20.M5.22 - VLT
®
is a registered Danfoss trademark
7-1
7