manualshive.com logo in svg

Danfoss vlt aqua, Instruction Manual, Page: 22 / 184

Share
Download
Danfoss vlt aqua Instruction Manual Download Page 22

4.2.6 Panel Through Mounting

A Panel Through mount kit is available for adjustable frequency drive series , VLT Aqua Drive and .

In order to increase heatsink cooling and reduce panel depth, the adjustable frequency drive may be mounted in a through panel. Furthermore, the built-
in fan can then be removed.

The kit is available for enclosures A5 through C2.

NOTE!

This kit cannot be used with cast front covers. No cover or imminent plastic cover must be used instead.

Information on ordering numbers is found in the 

Design Guide

, section 

Ordering Numbers.

More detailed information is available in the 

Panel Through Mount Kit instruction, MI.33.H1.YY,

 where yy=language code.

4 Mechanical installation

VLT

®

 AQUA Drive

Instruction Manual

4-6

MG.20.M5.22 - VLT

®

 is a registered Danfoss trademark

4  

Summary of Contents for vlt aqua

























































































































































































Reviews:

No comments