5.1.6 AC line input connections for A2 and A3
Figure 5.6: First mount the two screws on the mounting plate, slide it into place and tighten fully.
Figure 5.7: When mounting cables, first mount and tighten the ground cable.
The ground connection cable cross-section must be at least 0.016 in
2
[10 mm
2
], or two rated line power wires terminated separately
according to
EN 50178/IEC 61800-5-1
.
VLT
®
AQUA Drive
Instruction Manual
5 Electrical installation
MG.20.M5.22 - VLT
®
is a registered Danfoss trademark
5-7
5