dallmeier DMS 80 Configuration Download

Page: 95 / 147

DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR

www.dallmeier.com

Transparent data channel/Direct camera control

Using this function data can be sent via the recorder to another device. The data then arrive

at the receiver in exactly the same form as they were sent by the transmitter (transparent

data channel).
This is used, for example, to send control signals from PView via LAN to the recorder. This

then forwards them to a controllable camera via the serial port.
In the opposite direction, confirmation signals from the camera are read at the serial port

and sent via LAN to PView.

DNI (external system)

This setting allows an external system to be connected for example an automatic teller ma-

chine (ATM), access control system or a Huth cash desk via a Dallmeier Network Interface

(DNI-1).

UPS

This function allows communication with an uninterruptible power supply unit (UPS). This

means that messages can be sent from the UPS (for example charge status of the battery)

to the recorder where they can be output or processed.

DNI (camera control)

This function allows the connection of an external control desk or a dome camera via a

Dallmeier Network Interface (DNI-1).

Summary of Contents for DMS 80




















































































































































Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands

dallmeier DMS 80, Configuration

Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands