dallmeier DMS 80 Configuration Download

Page: 106 / 147

DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR

www.dallmeier.com

106

•  No pure GDI printer
•  Paper format 210 x 297 mm (DIN A4/Letter)
•  Postscrip printer preferred

It is possible to print the image with any printer when a PC/ PView is used to evaluate the

recordings. The only requirement is that the PC’s operating system supports the particular

printer.

Select the

Manufacturer

of a suitable printer.

Select a suitable

Model

Enter the

Printer Name

Confirm with

The new printer is listed in the

Printer

dialog with the name you have entered for it. In ad-

dition the default

Properties

will be displayed.

Fig. 12-3 :

Printer

dialog with created printer

The device marked in the

Printer

box can be deleted by clicking on the appropriate Delete

button.
If you have created several printers, you can define the device marked in the

Printers

box

as the

Default

printer

Summary of Contents for DMS 80




















































































































































Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands

dallmeier DMS 80, Configuration

Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands