DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
37
The default settings will be adopted for all connected cameras. The memory will be assi-
gned in equal parts to every camera. Recording (permanent) will be activated for all con-
nected cameras.
¾
Configure the recording as described below if required.
6.2
Connection
The recording configuration mostly can be done before the connection to the single came-
ras is established (pre configuration). Exceptions exist for some configuration options (e.g.
preview image, SEDOR
®
, SmartFinder) and camera types (other IP cameras).
6.2.1
Analogue cameras
The connection to analogue cameras is established with the physical connection to the cor-
responding video input. In the
Recording Settings
dialog all connected analogue cameras
will be labeled with a yellow symbol (column
Camera Name
).
6.2.2
IP cameras
The connection to IP cameras is realized via a network. Therefore the connection data (IP
address, password) has to be entered.
¾
Right
-
click
in the
Recording Settings
dialog on the relevant recording button.
The
IP Camera Setup
dialog will be displayed.
Fig. 6-7 :
IP camera Setup
dialog
¾
Select the relevant character of the IP camera.
¾
Confirm with
OK
.
¾
Proceed as described in the following.
The following dialogs have a different design in the various track modes. The configuration
procedure always is the same.
6.2.2.1
Dallmeier IP and HD cameras
After corresponding selection and confirmation of the
IP Camera Setup
dialog, the dialog
for
configuration of a Dallmeier IP camera
will be displayed.
