dallmeier DMS 80 Configuration Download

Page: 45 / 147

DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR

www.dallmeier.com

6.4

Recording mode

Recording configuration is done separately for every camera / track.
Note that the

Standard

track mode differs basically from the modes

manual

and

automa-

tic

in regard to the storage concept. That is why not all recordings modes are available in

the Standard track mode. Additionally there are differences in regard to the options of the

various recording modes and their configuration dialogs.

Rightclick

in the

Recording Settings

dialog on the relevant recording button.

The recording configuration dialog for the corresponding camera will be displayed.

Fig. 6-19 : Recording configuration

6.4.1

Manual and automatic mode

The following recording modes can be used with the various camera types in the

manual

and

automatic

track modes:

Analogue cameras

•  Permanent
•  Motion
•  Contact
•  Permanent with switching of recording mode/quality by timer
•  Permanent with quality switching by motion
•  Permanent with quality switching by contact

Dallmeier IP and HD cameras

•  Permanent
•  Motion
•  Contact
•  Switching through timer

Other IP cameras

• Permanent
• Contact

Summary of Contents for DMS 80




















































































































































Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands

dallmeier DMS 80, Configuration

Search results

Summary of Contents for DMS 80

Reviews:

Related manuals for DMS 80

Brands by name

Popular brands