DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
117
¾
Click in the
Control
column on the line containing the relevant camera.
If you have already configured a COM port to control a camera using DNI, the symbol for
a dome camera will first be displayed in the Control column. In this case
right-click
on the
symbol.
The
Recording settings
(camera control) dialog will appear.
Fig. 12-20 :
Recording settings
dialog (
camera control
)
¾
Click on
UTC Camera
.
Instead of the symbol for a dome camera, the symbol for a normal camera will be displayed
in the
Recording settings
dialog.
Fig. 12-21 : Camera symbol box
¾
Finally confirm with
OK
.
