DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
42
The
Exception
will
replace
, not complement, the
Standard
setting of the relevant day.
6.3.3
Tracks timer
The
Tracks Timer
also allows the time-based recording. Unlike the camera timer the
Tracks Timer
is always
referring
to a
track
or
track type
. It enables independent timer
settings for the recording in
all S-Tracks
and in the LP-Track of a particular camera.
The
Tracks Timer
is relevant in the
Standard
track mode only. When overlapping, the
Camera Timer will be preferred.
¾
Open the
Tracks Timer
dialog via
Setup
>
Recording
>
Tracks
Timer
.
Fig. 6-14 :
Tracks timer
dialog
¾
Select
all S-tracks
(
s
) or the
relevant LP-track
in the
Tracks
section.
¾
Set
Active
and
Inactive
periods as described above.
¾
If necessary set
Exceptions
as described above.
¾
Confirm with
OK
.
The
Tracks Timer
will be reset when the track mode is changed.
6.3.4
Areas
The Areas dialog enables the definition of active (relevant) image areas for motion detection.
Furthermore privacy zones for critical image areas can be defined.
This function is available for analogue cameras only.
6.3.4.1
Active areas
In default configuration the entire image is relevant for motion detection. Inactive areas can
be defined if motion in specific image areas should not be taken into account.
¾
Open the
Areas
dialog via
Setup
>
Recording
>
Areas
.
