DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
85
¾
Enter the alarm host’s
IP-Address
.
¾
Set the maximum duration of a connection attempt as
Ping Timeout
(seconds).
The connection attempt will be canceled when
Ping Timeout
is expired. After a break the
connection attempt will be started again and repeatedly (
Interval
). The interval and the
number of new connections attempts can be adjusted in the
Interval settings
dialogs.
¾
Open the
Interval
settings
dialog with
Interval
.
Fig. 8-5
¾
Please not the GUI’s explanations.
¾
Please not the explanations below.
¾
If necessary make the required changes.
¾
Confirm with
OK
.
If options
A
or
C
have been selected the connection attempt will be tried until it actually is
successful and the message can be send to the alarm host.
If option
B
is selected the connection attempt will only be tried X times. Then the message
will be discarded or send to an alternative alarm host (see in the following).
8.3.3
Alternative alarm host
One alternative can be defined for every alarm host. The alternative alarm host will be ad-
opted as addressee of a message if the original alarm host permanently is not reachable
(see above).
Fig. 8-6
