DMS 80 / DMS 160 / DMS 240 / DMS 240 HSR
www.dallmeier.com
87
8.3.5
Messages
Which messages will be sent can be defines separately for every alarm host. Thereby take
into account that the single messages are combined to message categories. The message
displayed by the alarm host and the additional displayed information depend on the alarm
host’s configuration.
¾
Select an alarm host with a left click in the alarm host list.
¾
Open the
Messages
dialog with
Messages
.
Fig. 8-9
¾
Select relevant message categories by activation of the corresponding checkbox.
¾
Please not the explanations below.
¾
Confirm with
OK
.
Alarm
This message will be send if the recorder starts or ends its alarm state.
The alarm state is triggered by the
Start alarm
contact IN function. It is stopped by the
corresponding contact IN functions or after the set alarm duration (
System
>
Options
>
Alarm duration
) being expired.
Event
This message will be send if the recorder starts recording of an arbitrary camera because
of a movement event.
Array Contact
This message will be send if the recorder starts recording of a camera because of a contact
IN function (Start recording (recording mode Contact).
HDD Failure
This message will be send when a HDD read or write error is detected.
Housekeeping-Error
This message will be send if the system monitoring (housekeeping) detects an event of the
category “error“.
