dallmeier DLS 24 S1, Installation And Configuration Manual

Page: 35 / 215

35 Dallmeier electronic GmbH & Co. KG
Rear side of
connection panel
A
IMPORTANT
Despite all the service-friendly features, you must
still ensure that dirt and foreign particles do not
end up in the connection strip (A) once the
connection panel is removed.
Due to the large number of contacts, a short-circuit
could occur easily and cause a malfunction of the
system.
5.3 Connection variants - VGA/CVBS/YC
Depending on its features, your system offers an array of options
for connection of a monitor. It is important to use the right type of
mouse here.
NOTE
A split presentation is only possible if a VGA
monitor is used on VGA – SCD 25 or MCD 25 or
if an CVBS or Y/C monitor is used on the CVBS
or Y/C output of the MCD 25.
The following applies, in general:
If you would like to work with the VGA interface, the USB connection
for the mouse is to be used.
Fig. 5-3
Fig. 5-4