dallmeier DLS 24 S1, Installation And Configuration Manual

Page: 160 / 215

160 Dallmeier electronic GmbH & Co.KG
Digital HD Recorders DMS/DLS
Function Description
HKInfo The relevant relay responds when HK sends an information
message to tank. Information messages are messages notifying that
the system has reached a (critical) state or has left the previous
(critical) state:
Š
(CTUp, CTLow, CTNorm)
CPU temperature too high / low / normal again,
Š
(ITUp, ITLow, ITNorm)
internal temperature too high / low / normal again,
Š
(ETUp, ETLow, ETNorm)
external temperature too high / low / normal again,
Š
(ATUp, ATLow, ATNorm)
check temperature too high / low / normal again,
Š
(CTDown) CPU temperature has reached shutdown limit;
recorder is shut down,
Š
(ITDown) internal temperature has reached shutdown limit;
recorder is shut down,
Š
(ETDown) external temperature has reached shutdown limit;
recorder is shut down,
Š
(ATDown) check temperature has reached shutdown limit;
recorder is shut down,
Š
(FFStop, FFRun, FFLow, FFHigh, FFNorm)
front fan stops, spins again, speed to low, too high, normal
again
Š
(RFStop, RFRun, RFLow, FFHigh, FFNorm)
rear fan stops, spins again, speed to low, too high, normal
again
HKError The relevant relay responds when HK sends a fault message to
tank. Fault messages are messages which arise when faults occur
and when faults are eliminated:
Š
reading of the CPU temperature,
Š
reading of the internal temperature,
Š
reading of the external TemperaturHKeep,
Š
reading of the front fan speed,
Š
reading of the rear fan speed,
Š
initialization of the IO card,
Š
initialization of the display.
HKeeping OR-combination of the three top HK-relay functions.
The relay responds when a change from the previous condition has
occurred.