dallmeier DLS 24 S1, Installation And Configuration Manual

Page: 135 / 215

135 Dallmeier electronic GmbH & Co.KG
Message transmission
A message is only sent to an alarm host if this alarm host has been
activated.
¾
For activation select the relevant alarm host.
¾
Check the checkbox in the Active column.
This method allows you to decide even after the configuration if the
messages will or will not be forwarded to a special alarm host.
Messages
You must set the function for which an alarm message is forwarded
to this host for each alarm host. The corresponding selection is
found in the selection menu. A separate selection can be made for
each alarm host.
¾
First select the alarm host for which you would like to set the
messages.
¾
Then click the Messages button.
Fig. 15-12
Fig. 15-13