dallmeier DLS 24 S1, Installation And Configuration Manual

Page: 20 / 215

20 Dallmeier electronic GmbH & Co.KG
Digital HD Recorders DMS/DLS
Mains connection
The DMS/DLS may only be connected to a freely-accessible and
grounded protected-contact outlet in the building installation.
Recommendation: Operate the DMS/DLS from an uninterrupted
power supply (UPS).
Use the accompanying inspected power cables/power supplies for
all units which are part of the system.
Three mounting options are available for the DMS/DLS:
z
Stand-alone installation of the system
z
Installation in a 19" equipment rack
z
VdS-conformant mounting with VdS mounting kit
4.2 Stand-alone installation of system
The simplest type of mounting is the stand-alone installation without
additional mechanical attachment.
However, all connections for cameras, monitor, mouse and possible
external components are freely accessible.
NOTE
To prevent possible tampering, this type of
mounting should only take place in secured rooms.
Access to these rooms and to the system should
only be possible for authorized personnel.
4.3 Installation in a 19" equipment cabinet
If your DMS/DLS is to be mounted in a 19" equipment cabinet, a
corresponding unit bracket is required.
1 Inserting DMS/DLS in 19" bracket
¾
Place your DMS/DLS in the unit bracket so that the unit feet
are seated in the corresponding cut-out areas (A) (see Fig. 4-
1).