Electrical Installation
7
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
TOP
Display 1
Power In
From Power
Box At
Display Base
Display 2
Power Out
From Display 1
Daisy Chained
To Display 2
Use Grounding
Stud
Display 3
Power Out
From Display 1
Daisy Chained
To Display 2
Use Grounding
Stud
Use Grounding
Stud
Power
Box
Figure 7:
Proper Grounding for Multiple Fuelight Displays
To connect power to the display, follow these steps:
1�
Route the power cable into the display through one
of the knockouts on the display’s backsheet. Refer to
2�
Use wire nuts or other appropriate hardware to
connect power wires – hot (black) and neutral (white)
– to the power supply harness or pigtail. Refer to
.
3�
Connect power supply ground wire to the grounding
stud. Refer to
.
Note:
Verify the power supply ground wire is
connected to the grounding stud.
Figure 8:
Power Connection With
Grounding Stud
