Control Options Setup
19
Outdoor J-box Installation
1�
Choose a location on the support pole so the J-box is easily accessible for plugging in
the handheld controller.
2�
Orient the box so the quick-connect cable
runs out the bottom of the box.
3� Permanently fasten the J-box vertically
once it
has been proven effective in the location.
4�
Connect the unterminated end of the quick-
connect cable to TB3 on Input card of J-box.
If multiple driver cards are used on the pylon,
connect the master driver to the quick-
connect cable on the input card, and the last
driver to the quick-connect cable connected
to TB3 of the output driver.
5�
Mount the bulkhead connector to the display structure within 8' (2.4 m) of any display
driver.
6�
Plug the terminated end of the quick-connect cable into jack J16 on a driver.
Outdoor J-box
Terminal
Wire
Color
TB3-4
Black
TB3-3
White
TB3-2
Green
TB3-1
Red
Limitation of Liability
The J-box is watertight and should not need additional protection from the elements, but
the warranty will be nullified if:
•
The J-box is modified.
• The J-box is improperly installed.
• The J-box is damaged.
Figure 38:
Outdoor J-box
