Copyright © 2022
All rights reserved. While every precaution has been taken in the preparation of this manual, the publisher assumes no
responsibility for errors or omissions. No part of this book covered by the copyrights hereon may be reproduced or copied
in any form or by any means—graphic, electronic, or mechanical, including photocopying, taping, or information
storage and retrieval systems—without written permission of the publisher.
Daktronics trademarks are property of Daktronics, Inc. All other trademarks are property of their respective companies.
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference
received, including interference that may cause
undesired operation.
Warning:
Risk of fire or electric shock. LED Retrofit
Kit installation requires knowledge of sign electrical
systems. If not qualified, do not attempt installation.
Contact a qualified electrician.
Warning:
Risk of fire or electric shock. Install this kit only
in host signs that have been identified in the installation
instructions and where the input rating of the retrofit kit
does not exceed the input rating of the sign
Warning:
Risk of fire or electric shock. Installation of this
LED retrofit kit may involve drilling or punching of holes
into the structure of the sign. Check for enclosed wiring
and components to avoid damage to wiring and
electrical parts.
Warning:
To prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or other sharp
objects.
Inquiries
Contact Daktronics with any questions regarding our
product compliance.
Mail:
Daktronics
201 Daktronics Dr.
Brookings, SD 57006 USA
Phone:
800-325-8766
Website:
