DFX-7
Ultrasonic Flaw Detector
31
No Gate
Gate On
The screenshots above show a rectified waveform with and without a gate enabled.
The following steps outline how to enable a gate as follows:
Activating a Gate
Gate1
1) Press the
MENU
key once to activate the menu items tab. Press the
MENU
key multiple times to tab right, and the
ESC
key multiple times to tab left,
until the
GT1
menu is highlighted and displaying the submenu items.
2) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
ALARM
is highlighted.
3) Press the
LEFT
and
RIGHT
arrow keys to toggle
ALARM
to
ON
. The menu
items should now become active and adjustable, as the gate is now active.
Set Detect
1) Press the
UP
and
DOWN
arrow keys until
DETECT
is highlighted.
2) Press the
LEFT
and
RIGHT
arrow keys to toggle the
ABOVE
or
BELOW
.
