Dakota Ultrasonics
164
3) Press the
ENTER
key to display the
Setups List
.
4) Press the
UP
and
DOWN
arrow keys to scroll to the
Setup Name
.
5) When the
Setup Name
is highlighted, press the
ENTER
key to display the
confirmation screen.
6) Press the
OK
key to delete the
Setup File
.
7) Finally, press the
MEAS
key to return to the measurement screen.
12.5 Using the Default Setup
The default setup feature was added to the
DFX-7
to use, as a last resort, if there are
no setups stored in the gauge –factory or otherwise. The only time this might
possibly occur is if the setup file in the
DFX-7
was somehow corrupted, and the user
does not have access to a computer to re-load the factory setups back into the
DFX-
7
. This gives the user the ability to load and modify a basic setup as follows:
Note:
The default file contains no probe zero data. Therefore, a zero must be
performed after loading. Also, the default setup can be loaded when using the flaw
mode feature, to eliminate the probe zero delay value, and start at the initial pulse or
zero.
