Dakota Ultrasonics
100
9.4 Coating Calibration (PECT)
Known Velocity
If the coating velocity is known, the user may wish to simply enter the velocity
number into the
DFX-7
, rather than have the
DFX-7
calculate the velocity value using
a known thickness on a coating sample(s). The steps for entering the velocity are
outlined below:
Using a Known Material Velocity
1) Press the
MENU
key once to activate the menu items tab. Press the
MENU
key multiple times to tab right and the
ESC
key multiple times to tab left until
the
CAL
menu is highlighted and displaying the submenu items.
2) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
COATING VEL
is highlighted.