DFX-7
Ultrasonic Flaw Detector
159
4) Use the
UP
and
DOWN
arrow keys to scroll through the setups until the
target setup is highlighted.
5) Press the
ENTER
key to activate the confirmation screen.
6) Press the
OK
key to load the setup from memory.
7) Press the
MEAS
key to return to the measure screen.
12.3 Saving a Setup
Once the
DFX-7
parameters and features have be adjusted for an application, the
user may elect to save these setting to a specific setup location for future use. This
can potentially save time and reduce error between users.
It is sometimes necessary to rename a previously saved setup, or add additional
comments about a particular setup. The setup name may have been entered
incorrectly, or the user needs to use the setup for a completely different project. An
inspector’s name or other comments about the project may also be required for
additional documentation purposes. The following procedures outline the necessary
steps for saving and editing a setup:
