![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-b-series/super-multi-nx-b-series_service-manual_2459105258.webp)
Si12-308
Outdoor Unit (52 / 58 / 68 / 75 Class)
Removal Procedure
247
2.3
Removal of
PCB
Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Step
Procedure
Points
1. Removing the controller
PCB
1
Remove 1 screw of the
PCB, and release two
tabs.
2
Release the tabs of the
terminal board, and
open the terminal
board.
3
Disconnect each
connector on the back
of the terminal board.
4
Disconnect the
service
monitor PCB
connector.
Release the tab to remove
the service monitor PCB.
Summary of Contents for Super Multi NX B series
