Daikin REYQ-TA Series, Service Manual

Page: 136 / 324

Field Setting from Remote Controller SiUS371614E
123 Field Settings
Filter Cleaning Sign
Whether or not to display "Filter Cleaning" after operation of certain duration can be selected.
∗
Filter cleaning sign is not displayed when an Auto-clean Panel is connected.
Time for Absence Area Detection
(For units with an infrared presence/floor sensor only)
By selecting the energy-saving operation mode in the absence, the target temperature is shifted to the energy-
saving end by 1°C (maximum 2°C) after the state of absence continues for a certain period of time.
Absent time defined for detection can be selected as follows:
• The set temperature displayed on the remote controller remains same even if the target temperature is shifted.
• As soon as people is detected while the temperature is shifted, this control will be cancelled (reset).
Mode No. First Code No. Second Code No. Contents
10 (20) 3
01 Displayed
02 Not displayed
Mode No. First Code No. Second Code No. Contents
10 (20) 7
01 30 minutes
02 60 minutes
30 (60)
∗
60 (120)
∗
31
19
28
27
26
17
21
30
29
20
18
Elapsed time of absence (min.)
Set temperature (˚C)
Human detection
Cooling (at 28˚C)
Heating (at 20˚C)
State of absence
∗
The values in parentheses represent the time
when Second code No. is "02."