![background image](http://html1.mh-extra.com/html/daikin/perfera-arxm-r-series/perfera-arxm-r-series_service-manual_2460267143.webp)
3
|
Components
Service manual
143
RXM20~71R + ARXM25~71R + FTXM20~71R + ATXM25~50R +
FVXM25~50A
Split New Perfera R32
ESIE20-11 – 2021.01
a
b
a
Nut
b
Propeller fan blade assembly
3
Pull and remove the propeller fan blade assembly from the DC fan motor
assembly.
INFORMATION
Use a pulley remover if the propeller cannot be removed manually.
4
To install the propeller fan blade assembly, see
To remove the DC fan motor assembly
1
Remove the propeller fan blade assembly from the DC fan motor assembly,
see
142].
DANGER: RISK OF ELECTROCUTION
Wait for at least 10 minutes after the circuit breaker has been turned OFF, to be sure
the rectifier voltage is below 10 V DC before proceeding.
2
Disconnect the DC fan motor connector from the main PCB.
3
Unlock the ferrite bead.
4
Cut the tie strap.
5
Detach the DC fan motor harness from the switch box.
6
Slightly bend the harness retainers to detach the DC fan motor harness.
7
Disconnect the DC fan motor connector from the main PCB.
e
d
d
a
c
b
a
DC fan motor connector