![background image](http://html1.mh-extra.com/html/daikin/ftks20d3vmw/ftks20d3vmw_service-manual_4060508138.webp)
SiENBE12-713
Instruction
System Configuration
127
ATTENTION
"
To operate the remote control
•
To use the remote control, aim the
transmitter at the indoor unit. If there is
anything to block signals between the unit
and the remote control, such as a curtain,
the unit will not operate.
•
Do not drop the remote control. Do not get it
wet.
•
The maximum distance for communication is
about 4m.
"
To fix the remote control holder on the wall
1. Choose a place from where the signals
reach the unit.
2. Fix the holder to a wall, a pillar, etc. with
the screws supplied with the holder.
3. Place the remote control in the remote
control holder.
"
About remote control
•
Never expose the remote control to direct sunlight.
•
Dust on the signal transmitter or receiver will reduce the sensitivity. Wipe off dust with soft cloth.
•
Signal communication may be disabled if an electronic-starter-type fluorescent lamp (such as inverter-type lamps) is in the
room. Consult the shop if that is the case.
•
If the remote control signals happen to operate another appliance, move that appliance to some-where else, or consult the
shop.
Receiver
Remote control
holder
To remove, p
u
ll it
u
pw
a
rd
s
.
S
et
Summary of Contents for FTKS20D3VMW
