![background image](http://html1.mh-extra.com/html/daikin/ftks20d3vmw/ftks20d3vmw_service-manual_4060508202.webp)
SiENBE12-713
Instruction
System Configuration
191
2.2.5
Adjusting the air flow direction
Notes on flaps and louvers angles
You can adjust the air flow direction to increase your comfort.
"
To adjust the horizontal blades (flaps)
1. Press “SWING button
”.
•
“
” The display on the LCD and the
flaps
will begin to swing.
2. When the flaps have reached the desired
position, press “SWING button” once
more.
•
The flaps will stop moving.
•
“
” disappears from the LCD.
"
To adjust the vertical blades (louvres)
Hold the knob and move the louver.
(You will find a knob on the left-side and the right-side blades.)
•
Unless “SWING” is selected, you should set the flap at a near-
horizontal angle ing heat mode and at a upward position in COOL or
DRY mode to obtain the best performance
"
ATTENTION
•
When adjusting the flap by hand, turn off the unit, and use the remote
controller to restart the unit.
•
Be careful when adjusting the louvers. Inside the air outlet, a fan is
rotating at a high speed.
1, 2
COOL/
DRY
HEAT
Summary of Contents for FTKS20D3VMW
