![background image](http://html1.mh-extra.com/html/daikin/ftks20d3vmw/ftks20d3vmw_service-manual_4060508216.webp)
SiENBE12-713
Instruction
System Configuration
205
2.2.12 Care and cleaning
CAUTION
CAUTION
Before cleaning, be sure to stop the operation and turn the breaker OFF.
UNITS
"
Indoor unit, Outdoor unit and Remote control
1. Wipe them with dry soft cloth.
"
Front panel
1. Open the front panel.
•
Slide the two stoppers on the left and right
sides inward until they click.
2. Remove the front panel.
•
Remove the string.
•
Allowing the front panel to fall forward will
enable you to remove it.
3. Clean the front panel.
•
Wipe it with a soft cloth soaked in water.
•
Only neutral detergent may be used.
•
In case of washing the panel with water, dry
it with cloth, dry it up in the shade after
washing.
4. Attach the front panel.
•
Insert the front panel into the grooves of the
unit (3 places).
•
Attach the string to the right, inner-side of the
front grille.
•
Close the panel slowly.
•
Don’t touch the metal parts of the indoor unit. If you touch those parts, this may cause an injury.
•
When removing or attaching the front panel, use a robust and stable stool and watch your steps carefully.
•
When removing or attaching the front panel, support the panel securely with hand to prevent it from falling.
•
For cleaning, do not use hot water above 40 °C, benzine, gasoline, thinner, nor other volatile oils, polishing compound,
scrubbing brushes, nor other hand stuff.
•
After cleaning, make sure that the front panel is securely fixed.
S
tring
S
tring
Pl
a
ce front
p
a
nel in
groove
s
.
Summary of Contents for FTKS20D3VMW
