![background image](http://html1.mh-extra.com/html/daikin/ftks20d3vmw/ftks20d3vmw_service-manual_4060508170.webp)
SiENBE12-713
Instruction
System Configuration
159
FILTERS
1. Open the front panel.
2. Pull out the air filters.
•
Push a little upwards the tab at the center of
each air filter, then pull it down.
3. Take off the Titanium Apatite Photocatalytic
Air-Purifying Filter.
•
Hold the recessed parts of the frame and
unhook the four claws.
4. Clean or replace each filter.
•
See figure.
5. Set the air filter Titanium Apatite
Photocatalytic Air-Purifying Filter as they
were and close the front panel.
•
Insert claws of the filters into slots of the front
panel. Close the front panel slowly and push
the panel at the 3 points. (1 on each side and
1 in the middle.)
"
Air Filter
1. Wash the air filters with water or clean them
with vacuum cleaner.
•
If the dust does not come off easily, wash
them with neutral detergent thinned with
lukewarm water, then dry them up in the
shade.
•
It is recommended to clean the air filters
every two weeks.
"
Titanium Apatite Photocatalytic Air-Purifying Filter
The Titanium Apatite Photocatalytic Air-Purifying
Filter can be renewed by washing it with water once
every 6 months. We recommend replacing it once
every 3 years.
[Maintenance]
1. Remove dust with a vacuum cleaner and wash lightly with water.
2. If it is very dirty, soak it for 10 to 15 minutes in water mixed with a neutral cleaning
agent.
3. Do not remove filter from frame when washing with water.
4. After washing, shake off remaining water and dry in the shade.
5. Since the material is made out of paper, do not wring out the filter when removing
water from it.
[Replacement]
1. Remove the tabs on the filter frame and replace with a new filter.
•
Dispose of the old filter as flammable waste.
T
a
b
Tit
a
ni
u
m Ap
a
tite
Photoc
a
t
a
lytic
Air-P
u
rifying Filter
Filter fr
a
me
T
ab
Air fr
a
me
P
us
h
Tab
Summary of Contents for FTKS20D3VMW
