WEB Operations
80
Images on the screens keep stationary, and the last frame will be displayed on the
screen.
Click
Display Normally
in the
Self Testing
mode, and then you can unlock the
screen.
Click
Send to Single Wall
, and then you can freeze screens of a single video
wall.
Self testing
You can control a single output port or all output ports of the corresponding screens, and make
the output port (s) do self testing. To do screen self testing can detect whether screens have
display malfunctions.
Step 1 Select self testing as the image mode. See Figure 3-85.
Figure 3-85 Self testing
Step 2 Select self testing types according to your requirements.
Step 3 Click
Send to Output Port
, you can control a single screen that corresponds to a
single output port to make the screen do self testing.
Click
Send to All Walls
, you can control the on/off state of all the screens to
make all screens do self testing.
Click
Send to Single Wall
, you can control screens that corresponds to a single
video wall to make the screens do self testing.
3.4.5.6 Correction Coefficient
You can import the files of screen correction coefficient to the system. When creating a new
video, you can use the files to correct hardware coefficients of the screen.
Step 1 Select
Setting >
Display > Correction Coefficient
.
The
Correction Coefficient
interface is displayed. See Figure 3-86.
