Dahua HCVR82**A-S3 Series, User Manual

Page: 214 / 381

202

Export: Please connect the peripheral device first and then go to the following interface. Click
Export button, you can see there is a corresponding
“Config_Time” folder. Double click the folder,
you can view some backup files.

Import: Here you can import the configuration files from the peripheral device to current device. You
need to select a folder first. You can see a dialogue box asking you to select a folder if you are
selecting a file. System pops up a dialogue box if there is no configuration file under current folder.
After successfully import, system needs to reboot to activate new setup.

Format: Click Format button, system pops up a dialogue box for you to confirm current operation.
System begins format process after you click the OK button.
Note:

System can not open config backup interface again if there is backup operation in the process.

System refreshes device when you go to the config backup every time and set current directory as
the root directory of the peripheral device.

If you go to the configuration backup interface first and then insert the peripheral device, please click
Refresh button to view the newly added device.
Figure 4-204
4.19.3 Default
From main menu->Setting->System->Default, check the box to restore default factory setup. See Figure
4-205.

Camera

Network

Event

Storage