User's Manual
272
Figure 8-64 IO1
Step 4
Click
to enable the alarm.
Step 5
Set parameters.
Table 8-24 Local alarm parameters description
Parameters
Description
Name
In the Alarm name box, enter a name for the alarm.
Type
Select alarm input device type. Both NO and NC are supported.
Debouncing
The system records only one event during this period.
Step 6
Click Deployment Time to select schedule from the drop-down list.
After setting deployment period, system triggers corresponding operations when there is
a motion detection alarm in the specified period.
●
Click View Schedule to view detailed schedule settings.
●
If the schedule is not added or the added schedule does not meet actual needs, click
Add Schedule. See "8.8.4 Schedule" for detailed information.
Step 7
Click Actions to set alarm actions. See "8.4.1 Alarm Actions" for detailed information.
Step 8
Click Save.
8.4.3.4 Thermal Alarm
●
Alarm types vary depending on the models of thermal cameras.
●
Make sure that configurations of thermal detections such as fire detection and temperature
detection have been done on the thermal camera.
Support the following thermal camera alarms.
