User's Manual
VI
any injuries or damages caused by the use of a nonstandard power adapter.
●
Do not place the Device in a place exposed to sunlight or near heat sources.
●
Keep the Device away from dampness, dust, and soot.
●
Put the Device in a well-ventilated place, and do not block its ventilation.
●
Install the server on a stable surface to prevent it from falling.
●
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the Device label.
●
The Device is a class I electrical appliance. Make sure that the power supply of the Device is
connected to a power socket with protective earthing.
●
Use power cords that conform to your local requirements, and are rated specifications.
●
Before connecting the power supply, make sure the input voltage matches the server power
requirement.
●
When installing the Device, make sure that the power plug and appliance coupler can be easily
reached to cut off power.
●
Install the server in an area that only professionals can access.
●
Extra protection is necessary for the Device casing to reduce the transient voltage to the defined
range.
●
If you did not push the HDD box to the bottom, then do not close the handle to avoid damage to
the HDD slot.
●
Install the Device near a power socket for emergency disconnect.
●
It is prohibited for non-professionals and unauthorized personnel to open the Device casing.
●
Affix the Device securely to the building before use.
Maintenance Requirements
●
Make sure to use the same model when replacing the battery to avoid fire or explosion. Dispose
the battery strictly according to the instructions on it.
●
Power off the Device before maintenance.
●
AI module does not support hot plug. If you need to install or replace the AI module, unplug the
Device power cord first. Otherwise, it will lead to file damage on the AI module.
●
The Device casing provides protection for internal components. Use a screwdriver to loosen the
screws before detaching the casing. Make sure to put the casing back on and secure it in its
original place before powering on and using the Device.
●
It is prohibited for non-professionals and unauthorized personnel to open the Device casing.
●
The appliance coupler is a disconnection Device. Keep it at a convenient angle when using it.
Before repairing or performing maintenance on the Device, first disconnect the appliance
coupler.
Transportation Requirements
Transport the Device under allowed humidity and temperature conditions.
