DAELIM DAYSTAR VL125E, Service Manual

Page: 156 / 253

11-9
Crank Case / Transmission / Crankshaft
Transmission Assembly
Coat the gear and gear bush with clean engine
oil and install the mainshaft and counter shaft.
Check the gears for freedom of movement or
rotation on the shaft.
Note the installation direction of each snap
ring.
Do not use the worn snap ring again.
Check the snap rings are seated in the grooves
spinning the rings. Align the end gaps of the
snap ring with the grooves of spline.
Install the mainshaft and countershaft into the
left crankcase together.
NOTE
Main Shaft
Main Shaft Main Shaft
Main Shaft
Main Shaft Main Shaft Main Shaft Main Shaft
Main Shaft
Main Shaft Main Shaft Main Shaft
Main Shaft
Counter Shaft
Counter Shaft Counter Shaft
Counter Shaft
Counter Shaft Counter Shaft Counter Shaft Counter Shaft
Counter Shaft
Counter Shaft Counter Shaft
Counter Shaft
Counter Shaft
Main Shaft Bearing
Main Shaft Bearing Main Shaft Bearing
Main Shaft Bearing
Main Shaft Bearing Main Shaft Bearing Main Shaft Bearing Main Shaft Bearing
Main Shaft Bearing
Main Shaft Bearing Main Shaft Bearing Main Shaft Bearing
Main Shaft Bearing
Remover 15mm
Remover 15mm Remover 15mm
Remover 15mm
Remover 15mm Remover 15mm Remover 15mm Remover 15mm
Remover 15mm
Remover 15mm Remover 15mm
Remover 15mm
Remover 15mm