DAELIM DAYSTAR VL125E, Service Manual

Page: 219 / 253

17-6
Charging System/Battery
Regulator/Rectifier
Inspection of the harness circuit
Remove the seat.
Disconnect the voltage regulator / rectifier
coupler.
Check for continuity between each terminal
and ground.
Inspection
Regulator/Rectifier Inspection
If there is no problem in the starter inspection.
check the regulator/rectifier coupler. Measure
the resistance between the connector terminals.
If the fingers reach to the metal part of tester
handle during the inspection, the resistance of
the human body is indicated. Therefore, be
careful of that
Must inspect using the defined tester as the
below. If being inspected by different tester,
can not be inspected exactly because strange
resistance value is indicated.
Measure the resistance using the DAELIM
PVA multi-tester.
- PVA multi-tester
Item Probe
Battery(Red)
Continuity between red
and ground
Ground lead Continuity between green
(Green) and ground
Charging coil
Yellow-yellow standard
lead(Yellow)
resistance, no continuity
between yellow and ground.
!
CAUTION
PVA Adapter