DAELIM DAYSTAR VL125E, Service Manual

Page: 95 / 253

6-4
Engine Removal / Installation
Engine Installation
Engine installation is essentially the reverse order
of removal.
Carefully align mounting points with the jack
to prevent damage from mounting bolt threads
and wire harness and cables.
Be careful not to damage any part of the frame
and bolt nuts.
Be sure to install the cables, tubes, and wires
to their correct positions(
1-11~13).
Torque
Engine hanger bolts:
(Front 1) 2.7kgf-m(27N.m)
(Front 1, Rear 2) 4.9kgf-m(49N.m)
Gear change arm bolt 1.2kgf-m(12N.m)
Drive sprocket bolt
1.2kgf-m(12N.m)
Inspect the following after installing the
engine.
- Engine oil
- Throttle glip operation
- Clutch lever operation
- Drive chain
NOTE