DAELIM DAYSTAR VL125E, Service Manual

Page: 171 / 253

14-4
Front Wheel/Front Fork/Steering
Assembly
Install the handle into the top bridge
connecting hole.
Tighten the handle washer and nut.
Torque: 2.6kgf-m(26N.m)
Install the master cylinder into the handle bar
with the “UP” mark on the holder facing up.
Align the mating surface of the master
cylinder and holder with the punch mark on
the handle bar.
Tighten the upper socket bolt first then tighten
the lower socket bolt.
When removing L. handle grip or R. handle grip
from the Throttle pipe, clean them preventing
the L. handle and throttle pipe attachment part of
handle grip with molybdenum.
After 3-5 minutes, install the grip. Install the
grip with turning according to user’s manual
attached on adhesives.
After attaching, leave it over 1hour until
drying the adhesives.
!
CAUTION
Top Bridge Connecting Hole
Top Bridge Connecting Hole Top Bridge Connecting Hole
Top Bridge Connecting Hole
Top Bridge Connecting Hole Top Bridge Connecting Hole Top Bridge Connecting Hole Top Bridge Connecting Hole
Top Bridge Connecting Hole
Top Bridge Connecting Hole Top Bridge Connecting Hole
Top Bridge Connecting Hole
Top Bridge Connecting Hole
Nut
Nut Nut
Nut
Nut Nut Nut Nut
Nut
Nut Nut Nut
Nut
Bond
Throttle Grip
Master Cylinder
Master Cylinder Master Cylinder
Master Cylinder
Master Cylinder Master Cylinder Master Cylinder Master Cylinder
Master Cylinder
Master Cylinder Master Cylinder Master Cylinder
Master Cylinder
“UP” Mark
“UP” Mark “UP” Mark
“UP” Mark
“UP” Mark “UP” Mark “UP” Mark “UP” Mark
“UP” Mark
“UP” Mark “UP” Mark “UP” Mark
“UP” Mark
Grip
Washer
Washer
Washer
Washer Washer
Washer Washer
Washer Washer
Washer
Washer Washer
Washer