![background image](http://html1.mh-extra.com/html/daelim/daystar-vl125e/daystar-vl125e_service-manual_3160189032.webp)
3-9
Maintenance
Installation
After assembling the chain tensioner, keep the
upper part of bracket which is holding chain
tensioner-roller to the underline of rear swing
arm under pipe.
Install the drive chain with the closed area of
the clip facing to the proceeding direction.
While driving, master link will be removed
suddenly when facing to the opposite direction.
Check for the master link-to-retainer clip
clearance.
Inspect the drive chain for adherence and
damaging.
Remove the contamination with a cleaner.
After drying completely, coat the chain with
#80-90 gear oil. Wipe any excessive oil off
the chain, check the drive chain for wear and
damage, replace it if necessary.
Check the drive sproket for wear and damage.
Replace it if necessary.
New motocycle adapts endless-type drive chain
(end-type for after-sales service purpose)
After once disassembling chain, chain clip can
be accidentally removed, so even change new
one after disassembling chain once.
If the chain or sprocket requires replacement,
the chain and sproket must be replaced as a
set.
Inspect the rollar for wear and damage, and
remove the chain tensioner
Service limit: 30.5mm
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
RR. Brake Pedal Return Spring
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Rollar
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Chain Tensioner Braket
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Flange Bolt
Dry
Gear Oil(#80-90)
NOTE
NOTE
Chain tensioner
Summary of Contents for DAYSTAR VL125E
